Who Re Grinds Cams
#1
Team Dysfunctional
Charter Member
Thread Starter
Join Date: Jan 2001
Location: Bolton Landing NY
Posts: 1,420
Likes: 0
Received 0 Likes
on
0 Posts
Who Re Grinds Cams
This is a bit off topic but I want to have my cams in 05 mustang re ground. I not looking for new cams, I want to regrind my existing ones while the car sits over the winter. I had a few custom cams made for my street cars in the past but I can’t remember who made them. Anyone have suggestions
__________________
If it aint broke .... I can break it....
If it aint broke .... I can break it....
#2
Registered
Re: Who Re Grinds Cams
www.competitionproducts.com
They have a separate company that does regrinds. I have one in my 454 rebuild and like it.
They have a separate company that does regrinds. I have one in my 454 rebuild and like it.
#8
Registered
iTrader: (1)
Join Date: Jul 2004
Location: Tacoma,wa
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who Re Grinds Cams
if you regrind yours,won't you need new lash caps? I personally would buy new.vt,comp,crower all have nice cams at a reasonable price for your car.vt stage one N/A does not require a custom tune
#10
Team Dysfunctional
Charter Member
Thread Starter
Join Date: Jan 2001
Location: Bolton Landing NY
Posts: 1,420
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who Re Grinds Cams
Thanks . Ill take that as a compliment
By the way its what the wife wants
BLKHORSE, thanks for the advise, I am looking at the comp cams now. The car is set up as a road car not a drag car. I generaly keep the rpm's up high but I dont want to make the mistake and installl a drag racing cam. I'm not sure what I am looking for in a cam I can get out of a re grind. If I am going to change the cams I'm looking to get as much out of it as possible, looking at a stage 2 or larger. By summer there will be about every upgrade available to that cars suspension , drive train and motor, aside from a supercharger. I would like 450 HP N.A and around 600 with NOS.
__________________
If it aint broke .... I can break it....
If it aint broke .... I can break it....
Last edited by Hot Boat; 02-06-2007 at 05:19 PM.