Offshoreonly.com - Camshaft

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Camshaft (https://www.offshoreonly.com/forums/general-q/155134-camshaft.html)

Imp Thomas

04-03-2007 02:44 PM

Camshaft

Hi i am new member from Sweden so sorry fore my english,

I have a mercruiser 7,4 mpi -98 and i am going replace my camshaft i have a cam from a 454 mag mpi -98 the mercruiser number are #431-850478 but i do not now if this is a roller cam will it work with my roller lifters? Do annyone have the specs fore this cam?

Thanks fore answer need alitle help..

Griff

04-03-2007 03:24 PM

If you change the cam, you will also have to change the ECM and possibly parts of the fuel injection.

Imp Thomas

04-03-2007 04:05 PM

Allright i will lockin to that.
But also need the specs?
And shall the timing be the same?

KAAMA

04-04-2007 06:02 AM

Quote:

Originally Posted by Imp Thomas (Post 2080338)

Griff is right----also, you might try getting ahold of RMbuilder/Bob Madara of Marine Kinetics in New York. He does this kind of stuff for boaters all the time, is very knowledgable and can probably tell you the cam you're asking about as well as help you with the pro's & con's about your project, etc. His phone number is (585) 654-8583

Payton

04-04-2007 06:30 AM

I think these are your specs.
http://www.cranecams.com/?show=brows...31&lvl=2&prt=5

tomas_wallin

04-04-2007 07:05 AM

Quote:

Originally Posted by Payton (Post 2081296)

I think these are your specs.
http://www.cranecams.com/?show=brows...31&lvl=2&prt=5

No, thats a .050 duration @ 266/270 and a max lift of .714...

As KAAMA said - contact RMBuilder, he's great to deal with!

By the way - Welcome to OSO IMP Tompa! :D

Imp Thomas

04-04-2007 11:05 AM

Thanks guy`s

All times are GMT -5. The time now is 07:51 PM.