Full hydraulic steeringi hose diagram?
#1
Registered
Thread Starter
Join Date: Jun 2005
Location: Springfield, VA
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Full hydraulic steeringi hose diagram?
Anyone have a hose diagram for a full hyd external dual ram steering setup? I'm missing that in my directions.
I have the helm with 4 ports, 2 cylinders, fittings, hoses, and a funny cylinder that looks like a check valve.
I have the helm with 4 ports, 2 cylinders, fittings, hoses, and a funny cylinder that looks like a check valve.
#2
Registered
Go to Imco nevada's website. They have it there. I'm pretty sure that the funny cylinder is the filter. It goes between the pump discharge and helm.
Rene
PS I decided to look it up. The link is http://www.imcomarine.com/nvcatalog/index.html It's about 1/3 of the way into the catalog
Rene
PS I decided to look it up. The link is http://www.imcomarine.com/nvcatalog/index.html It's about 1/3 of the way into the catalog
Last edited by oldandtired; 04-05-2007 at 12:45 PM.
#3
Registered
Thread Starter
Join Date: Jun 2005
Location: Springfield, VA
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Funny, I just got Brian's XS system too. It's sitting in my living room right now. His instructions are missing the diagram. He doesn't respond to emails very well.
I was also reading some of your whipple postings- I have an EFI whipple sitting on my work bench, mind if I throw a few questions your way when the time comes?
#5
Registered
Thread Starter
Join Date: Jun 2005
Location: Springfield, VA
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Go to Imco nevada's website. They have it there. I'm pretty sure that the funny cylinder is the filter. It goes between the pump discharge and helm.
Rene
PS I decided to look it up. The link is http://www.imcomarine.com/nvcatalog/index.html It's about 1/3 of the way into the catalog
Rene
PS I decided to look it up. The link is http://www.imcomarine.com/nvcatalog/index.html It's about 1/3 of the way into the catalog