Need Speedmaster VI transom cut template
#1
Need Speedmaster VI transom cut template
Does anyone have a Speedmaster Six transom cut-out template? Looking to compare Six cut-out with Konrad.
Thanks
[email protected]
Thanks
[email protected]
#2
Gold Member
Gold Member
Join Date: May 2002
Location: DFW
Posts: 1,127
Likes: 0
Received 0 Likes
on
0 Posts
Do you mean the gimble bolt drilling fixture ? We made two and they are dead on.
we made one that included the # 5 bolt pattern and the # 6 bolt pattern on one fixture. The centerline was adjusted between the two providing for an X change. # 5's came off and # 6's went on ------The fixture was bolted up to the #5 bolt holes and then the # 6 holes were drilled.
The gimble bolts fit perfect through a 4" transom ( 2" long )
we made one that included the # 5 bolt pattern and the # 6 bolt pattern on one fixture. The centerline was adjusted between the two providing for an X change. # 5's came off and # 6's went on ------The fixture was bolted up to the #5 bolt holes and then the # 6 holes were drilled.
The gimble bolts fit perfect through a 4" transom ( 2" long )
#3
Thanks CcanDo, but all I'm in need of is a paper template. I've got a customer who's interested in installing Konrads on a boat that was previously rigged (and cut) for Speedmaster VI.
I'd like to do an overlay of the Speedmaster VI with the Konrad cut-out.
Thanks again,
Kurt
I'd like to do an overlay of the Speedmaster VI with the Konrad cut-out.
Thanks again,
Kurt