Offshoreonly.com - Fuel pump line ?

Quote:

Originally Posted by jmherbert (Post 2099494)

The K&N doesn't have a provison for it, so I will put an adapter on the baseplate and bend some tubing so it will point down the carb throat.

That way, if it ever does burst, it could washdown the cylinders and destroy the motor:eek:

I'm half tempted to just run the line so it would dump into the water. :drink:

I have never heard or seen one bust.

The Gaffrig just threaded in to the base,with a nut, no tube inside it.Heres a pick of the my flame arrestor ,the tube I hid in the back so ya couldnt see it .Trick marine is a dealer for them also.

hope this helps

Ya might try them on the fitting.