Does anybody know or have the cam specs
04-26-2007 | 05:17 PM
#1
Thread Starter
Pirate of the Chesapeake
Joined: Aug 2006
Posts: 4,330
Likes: 0
From: North Point Creek, Md.
Does anybody know or have the cam specs
On a 1987 4.3 merc v6.. . I want to put a new cam in it and would like to know what lift I could go with b4 I need to change springs. Also thinking that 112 lsa is about as tight as i could go with out water reversion(through hub) issues.. Also this is a roller motor correct..
Thanks John
Thanks John
04-26-2007 | 05:28 PM
#2
Rob
Joined: Aug 2001
Posts: 21,637
Likes: 12
From: Ms
On a 1987 4.3 merc v6.. . I want to put a new cam in it and would like to know what lift I could go with b4 I need to change springs. Also thinking that 112 lsa is about as tight as i could go with out water reversion(through hub) issues.. Also this is a roller motor correct..
Thanks John
Thanks John
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
