Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   help 496 ho (https://www.offshoreonly.com/forums/general-q/165684-help-496-ho.html)

lakerat 08-08-2007 09:16 PM

help 496 ho
 
I have an '02 496ho. When I run out for appx. 30 minutes the boat will stall and will not restart for appx 20minutes. Almost like it is vapor locking. Any suggestions as to where to start

turnerrd 08-09-2007 05:27 PM

What speed does it stall at? Any codes active or loged? Or Alarms

lakerat 08-09-2007 09:33 PM

about 40mph and it is at the shop right now checking the codes and no alarms have sounded.

johnnyboatman 08-09-2007 09:57 PM

butch, try the crank sensor:cool-smiley-011:

turnerrd 08-10-2007 04:46 PM


Originally Posted by johnnyboatman (Post 2229528)
butch, try the crank sensor:cool-smiley-011:


That would set a code and an alarm I think

lakerat 08-13-2007 11:02 AM

jonny o I am going to put it on computer today....bl

lakerat 08-13-2007 05:08 PM

well the verdict is in and Jonny o you are a winner. crank sensor and also cam sensor codes came up....bl

hp500efi 08-13-2007 06:26 PM


Originally Posted by turnerrd (Post 2230549)
That would set a code and an alarm I think

Crank or cam sensor does not set off an alarm....when they go bad, they just leave you high and dry.

Dave_N 08-13-2007 09:03 PM

Was the fault an ACTIVE fault, or a stored fault? It's not uncommon to have stored cam and crank sensor faults even when the sensors are not faulty. If the fault is an active fault, then you have a bad sensor.

Dave

johnnyboatman 08-13-2007 09:03 PM

well hell we could of fixed it at the lake


All times are GMT -5. The time now is 04:33 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.