TRS alignment tool
 

I need a alignment tool for TRS drives. Barrow, Rent, or buy. ASAP. PM me w/ your offers.Thanks SC

Same as the Alpha and Bravo, just has a plate that goes in the bell housing to align the tool. If you have the Merctrans you also need an adapter that screws into the female input shaft. I have these adapters if you need them call my cell at 609-231-3525.

Thanks chuck, The transmissions are borg Warners. Would you know The outside diameter of the plate that goes on the alignment tool.( where it would reference off the bell hsg.) does it matter as long as it fits inside the bell hsg. bolts?

It sits inside the round of the bell hsg aft of the bellows. I am out of town until Tuesday so I can't measure it.