TRS alignment tool
#2
Charter Member
Charter Member
Same as the Alpha and Bravo, just has a plate that goes in the bell housing to align the tool. If you have the Merctrans you also need an adapter that screws into the female input shaft. I have these adapters if you need them call my cell at 609-231-3525.
#3
Registered
Thread Starter
Join Date: Dec 2005
Location: Middletown, Ct. 06457
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Thanks chuck, The transmissions are borg Warners. Would you know The outside diameter of the plate that goes on the alignment tool.( where it would reference off the bell hsg.) does it matter as long as it fits inside the bell hsg. bolts?