offset sterndrive

Reply Subscribe

Thread Tools

09-23-2007 | 01:00 AM

#41

2112

Registered

Joined: Dec 2003

Posts: 1,991

Likes: 13

From: Socialist Republic of Washington State

Quote:

Originally Posted by DMOORE

The other great thing about the Cleveland is, they can easily be taken out to 427. there are a ton of aftermarket parts available for them.

Darrell.

The Factory has all kinds of good parts in their SVO catalog.

09-23-2007 | 03:46 AM

#42

tassie boy

Thread Starter

Registered

Joined: Aug 2007

Posts: 25

Likes: 0

the biggest stroker kit available down under will take them out to 408 but when you use a 6.2 conrod the gudgeons go throuh the oil control ring groove and the engine smokes a bit . is the deck height of the american blocks higher or do you use the 400 blocks ???.cheers tassie boy

09-24-2007 | 11:58 PM

#43

OldEliminator

Registered

Joined: May 2005

Posts: 60

Likes: 0

Hey Tassie Boy, If it make you feel any better my 1984 Nordic with a SBC and aVolvo 280 w/trim was offset to the side over 1/2 and inch also, not sure they were thinking.

09-25-2007 | 02:20 AM

#44

tassie boy

Thread Starter

Registered

Joined: Aug 2007

Posts: 25

Likes: 0

is there any ill affects from the offset on yours. cheers tassie boy

09-25-2007 | 05:50 AM

#45

Strip Poker 388

Rob

Joined: Aug 2001

Posts: 21,637

Likes: 12

From: Ms

Quote:

Originally Posted by fastlane40

As for Tassie,it's a little island way down south where everybody is brother and sister.

hey thats kinda like Mississippi and Arkansas

__________________
.

The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.

12-25-2007 | 05:45 PM

#46

tassie boy

Thread Starter

Registered

Joined: Aug 2007

Posts: 25

Likes: 0

well guys i finally bowed to the pressure and purchased a 440hp mercruiser .454 big block chev and trs drive ,has anyone got any views on this combo. cheers tassieboy

12-25-2007 | 09:09 PM

#47

tassie boy

Thread Starter

Registered

Joined: Aug 2007

Posts: 25

Likes: 0

if you are serious it would make sense. cheers tassieboy

12-25-2007 | 11:16 PM

#48

Perlmudder

Registered

Joined: Dec 2006

Posts: 3,195

Likes: 28

From: Toronto, Ontario

thats the first thing i was thinking. never heard of circle track boat racing, but maybe it had super sharp (only left or only right hand) turns that required extreme turning ability?