Offshoreonly.com - SSM6 prop vent kit in need

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - SSM6 prop vent kit in need (https://www.offshoreonly.com/forums/general-q/167582-ssm6-prop-vent-kit-need.html)

SSM6 prop vent kit in need

I have #6 drive with the prop vent kit installed on the cav plate. I had the unfortunate happen. the water balast -20 stainless hose that runs from the tab to the transom came off the transom and ...yes got caught between the prop and vent fitting. I have 17 1/2" dia props which leave 1/4" clearance for the -20 hose.

Anyway, the fitting (and prop) were damaged and these are no longer available. I can have this one cut and repaired but if someone has an old one sittinf around,and want to part with it nicely, please let me know.

thanks!
Ken

We through a blade last Thursday with the same result taking out the botton stainless inlet tube,we had our new kit within 24hrs from Bob Teague.

thanks for the answer for a kit.
dog

iS IT SOMETHING THAT CAN BE MADE FOR YOU??
PLS POST OR EMAIL A PICTURE.