SSM6 prop vent kit in need
#1
VIP Member
VIP Member
Thread Starter
Join Date: Nov 2002
Location: Great Lakes
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
SSM6 prop vent kit in need
I have #6 drive with the prop vent kit installed on the cav plate. I had the unfortunate happen. the water balast -20 stainless hose that runs from the tab to the transom came off the transom and ...yes got caught between the prop and vent fitting. I have 17 1/2" dia props which leave 1/4" clearance for the -20 hose.
Anyway, the fitting (and prop) were damaged and these are no longer available. I can have this one cut and repaired but if someone has an old one sittinf around,and want to part with it nicely, please let me know.
thanks!
Ken
Anyway, the fitting (and prop) were damaged and these are no longer available. I can have this one cut and repaired but if someone has an old one sittinf around,and want to part with it nicely, please let me know.
thanks!
Ken
__________________
47 Lightning SE
47 Lightning SE
Thread
Thread Starter
Forum
Replies
Last Post
MIKEHTMSR24
General Boating Discussion
3
07-22-2002 03:18 PM