Merc575 Spark Arrestor
 

Can anybody tell me where/how I can get ahold of a spark arrestor off of a 575sc?

Dude...you do not want to do that...the flame arrestor is like $1000 , you can use twin arrestors like I have or you can buy a dual arrestor similar to oem for around $300 or less..BUT..if you must have OEM..part# 849895A2 is the 575 flame arrestor..& part# 37-814601 is your decal..which is only like $95!

They can keep it for a $1000! I just wanted to have one when I put a blower on my HP500. Give it that factory look.

A 575sci arrestor probably wouldn't fit anyway. The 575sci uses twin throttle body injection.

Yes, but..I think that they are the same diameter as the carb...but I could be wrong..you can just buy the decal and put it on whater flame arrestor you decide on..I just went and had one made at a local decal shop....

Heey Bajapred. Who makes the flame arrestor you have??

Well, I actually have two 8"x 3" flame arrestors under that custom SS cover I made..Then I went down to the local decal Co. and had them make me a decal...I painted the two little designs you see above and below the decal just to give it more "blue" look. It turned out ok, but I still have other plans for it. Here is what it looks like under the cover.

Blown85,
I know where there are 2 clean ones. They can be adapted for 1 carb by redoing the bottom plate in sheetmetal. I'm checking now to see if a friend wants to sell them.
Regards,
Steve

575 flame arrestor
 

Blown85,
My friend say he will sell his for $500, no charge on the decal :rolleyes:............he has 2 if anyone else needs one.
Regards,
Steve

I will ley ya know on the flame arrestor. I never thought that those things would be so expensive!! We will be in touch on the blower/cooler setup you have also. I will get with my buddy over the weekend and discuss what we are going to do.

Blown85,
Sounds good. Just let me know.
Regards,
Steve

I didn't either, of course I never looked one up since I have one. Just did on Bam's site $1107 retail with the decal, $940 their "discount" price with decal :eek: ..............
Ouch,
Steve

Will it go faster if I get one?

If you change the decal to "675SCi" :D !
Steve

Or you can buy one from Trick Marine and goto your Laser Ingraving "Guy" and do anything you want to it!!

That's what I did!

Dave

That looks sweet!!! I think I am going to go that route.

Bajapred - What blower is that? Is it better?

Blown85 - let me know where you get one to fit the 575's. I'd like to get some too.

My blower is just a B&M 250..pretty basic really...I need a 420 on my engine...the 250 is a little smallish for my engine CI...plus my porting and polishing.