Merc575 Spark Arrestor
09-13-2007, 08:38 AM
#2
Registered
iTrader: (1)
Join Date: Feb 2007
Location: Battlefield, MO
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Dude...you do not want to do that...the flame arrestor is like $1000 , you can use twin arrestors like I have or you can buy a dual arrestor similar to oem for around $300 or less..BUT..if you must have OEM..part# 849895A2 is the 575 flame arrestor..& part# 37-814601 is your decal..which is only like $95!
09-13-2007, 10:37 AM
#3
Registered
Thread Starter
Join Date: Jul 2007
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Dude...you do not want to do that...the flame arrestor is like $1000 , you can use twin arrestors like I have or you can buy a dual arrestor similar to oem for around $300 or less..BUT..if you must have OEM..part# 849895A2 is the 575 flame arrestor..& part# 37-814601 is your decal..which is only like $95!
Charter Member
09-13-2007, 06:14 PM
#5
Registered
iTrader: (1)
Join Date: Feb 2007
Location: Battlefield, MO
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Yes, but..I think that they are the same diameter as the carb...but I could be wrong..you can just buy the decal and put it on whater flame arrestor you decide on..I just went and had one made at a local decal shop....
Last edited by Bajapred; 09-13-2007 at 06:18 PM.
09-13-2007, 10:56 PM
#6
Registered
Thread Starter
Join Date: Jul 2007
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Heey Bajapred. Who makes the flame arrestor you have??
09-14-2007, 07:31 AM
#7
Registered
iTrader: (1)
Join Date: Feb 2007
Location: Battlefield, MO
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Well, I actually have two 8"x 3" flame arrestors under that custom SS cover I made..Then I went down to the local decal Co. and had them make me a decal...I painted the two little designs you see above and below the decal just to give it more "blue" look. It turned out ok, but I still have other plans for it. Here is what it looks like under the cover.
Last edited by Bajapred; 07-14-2010 at 01:52 PM.
09-14-2007, 09:33 AM
#8
Registered
I know where there are 2 clean ones. They can be adapted for 1 carb by redoing the bottom plate in sheetmetal. I'm checking now to see if a friend wants to sell them.
Regards,
Steve
............he has 2 if anyone else needs one.
09-14-2007, 10:57 AM
#10
Registered
Thread Starter
Join Date: Jul 2007
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
I will ley ya know on the flame arrestor. I never thought that those things would be so expensive!! We will be in touch on the blower/cooler setup you have also. I will get with my buddy over the weekend and discuss what we are going to do.
