I'm pretty sure I have the entire Kaama diagram on disk around here somewhere. I'll see if I can find it.

I might be able to help with a boot. I would need a dimensional drawing.
[email protected]

I have a manual for the Kamma and have rebuilt several. Feel free to call me if you have questions.

mike
402 968 7809

did you see my reply in the other post?

KAAMA Gimble Bearing Info
 

Boatman302, Do you also have a diagram or list of parts for the gimble bearing and shaft that goes through the transon. I need the 2 bearings and related shims and seals. Do you have the part numbers? I hear berry bearing makes most of the parts for the KAAMA section going through the transom. Thanks for your help on this.

Boatman302, Do you also have a diagram or list of parts for the gimble bearing and shaft that goes through the transon. I need the 2 bearings and related shims and seals. Do you have the part numbers? I hear berry bearing makes most of the parts for the KAAMA section going through the transom. Thanks for your help on this.