|
rocker studs
When changing from stock rocker arms to roller rocker on a BBC does the cocker studs need to be changed as well, for a longer set.
|
you need to get the rocker studs i think there for 7/16 roller rockers summit or teagues has them.
|
It has to be changed more for the type of material they are made from and the top of the stud is machined flat for the poly locks for the roller rockers. If you use the stock stud the locks will somtimes come loose because they are not flat enough in some cases.:D
|
If you have a Gen VI engine, you dont even have studs. You have 3/8" shoulder bolts.
|
the studs for the stock heads are 3/8 bottom 7/16top
|
Originally Posted by tony stamis
(Post 2436651)
the studs for the stock heads are 3/8 bottom 7/16top
|
Originally Posted by tony stamis
(Post 2436651)
the studs for the stock heads are 3/8 bottom 7/16top
|
Originally Posted by Strip Poker 388
(Post 2437188)
That always had botherd me why they went with 3/8,seems like it would be a weak link?
|
I have two Comp Cam sets for BBC new in packing, $40 per set plus shipping. They are at the shop so I don't have the part # now but will list tomorrow
|
Originally Posted by jeff1000man
(Post 2437190)
What is the part number for those studs? I never can seem to find them. Good thing I havn't needed many.
dont know.mine are still stock chevy ones:D |
| All times are GMT -5. The time now is 10:12 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.