Mercury 525EFI Header Bolts
#3
Registered
Platinum Member
Join Date: Jan 2006
Location: wisconsin
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
Do as stated above, But, let motor get to operating temp, let cool down completely, and tighten all bolts again. This will let the gaskets crush , the heat expansion will make some bolts loose when motor cools down. I do believe Merc says 30 ft lbs. although its hard to get torque wrench on all bolts if motor is in boat.
Bawana
Bawana
#6
Registered
Join Date: May 2002
Location: North of the Border
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts