Need some input on carb selection, 311 formula two fresh 502's 9.01/1,line bored, balanced, orig pistons, heads redone stain intake, inconell ex, stock alum dual plane, 496 take off merc alum man/ssriser, comp hr284, 230/236 @ .050 544 lift, roller rockers. planning to prop for 54-55 most of my time spent 33-3800 what should I put on top of it for a carb thanks Randy

800 TO 850 Holley. My motors are almost exactly the same as yours. I was going to put a real good carbs on them but money is getting tight. I bought a pair of HP 500 Holleys used from a gent here on OSO. The are 800 CFM Here is a pic of one done

thanks thats basically what I am thinking have a chance at a couple same way just thought I would get opinions before I jumped. Hope to see you out there this summer

before

What color is your boat?

Teal/yellow accent was four of us last year three 311 me/maroon external exaust, yellow, 1-336, this year another 311 all white

Even if ya find some old ones i would recomend sending them to pro systems in mi. Those guys are awsome....

http://www.prosystemsracing.com/index1.html


I have no affiliation with them they just due real good work....

I totally agree I wanted to go to him because my builder LOVES his carbs but again not it my budget this year. Ther is only one other carb that compares IMHO that is a Willy's

http://www.willyscarbs.com/

I would get them. They will work well after some jet changes.

thanks for the input guys