|
2 Attachment(s)
Originally Posted by jeff1000man
(Post 2507108)
Probably because it has a roll of paper towells sucked into the intake. :party-smiley-004:
ROCK ON !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!! |
Originally Posted by BY U BOY
(Post 2512394)
OK i haved been f'in with this for 3 hours now and have mounted it in every way possible.The bendix will not engage the fly wheel. Is there something i'm missing?Is it possible that the bendix doesn't extend as far as the stock one? Or is it not coming up high enough? I'm starting to get frustrated and not sure if i can take another min upsidedown:D
|
Originally Posted by RunninHotRacing158
(Post 2512854)
Hey BIG Daddy so those are'nt suppose to be there ??? You'd better head down here and fire this Biotch up :cool-smiley-011:By U Boyz did you get the starter squared away ??
ROCK ON !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!! |
Originally Posted by jeff1000man
(Post 2512874)
The bolts are in the wrong holes. I have had this problem before. There should be a mounting hole showing from under the block when it is installed correctly.
|
Originally Posted by BY U BOY
(Post 2512910)
I have mounted it in every way possible.:angry-smiley-038:
It sould be going back to the root of the problem though. High torqu starters demand more jusice from the battery, and it might not be getting enough juice to properly engage. You can come get one of mine and experimnet with, but I want it back. |
Originally Posted by jeff1000man
(Post 2512912)
Did you order for a 168 tooth fly wheel?
It sould be going back to the root of the problem though. High torqu starters demand more jusice from the battery, and it might not be getting enough juice to properly engage. You can come get one of mine and experimnet with, but I want it back. |
Originally Posted by jeff1000man
(Post 2512912)
Did you order for a 168 tooth fly wheel?
It sould be going back to the root of the problem though. High torqu starters demand more jusice from the battery, and it might not be getting enough juice to properly engage. You can come get one of mine and experimnet with, but I want it back. |
Originally Posted by jeff1000man
(Post 2512912)
You can come get one of mine and experimnet with Her , but I want her back. ROCK ON !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!! |
Chech the app. year some the the snouts are diff. depths, a friend had that problem it would come out but not engage. It was just free spining out 1/2 before the flywheel
|
Originally Posted by BY U BOY
(Post 2512934)
Its getting plenty of juice. The bendix is spinning like a mofo and extending fully. Its just not getting to the fly wheel. Its for a 168. I got it from BM22. Tell Chad to call me if you see him.
|
Originally Posted by RunninHotRacing158
(Post 2512946)
If she's good lookin and any good :cool-smiley-011: I'm not given her back :D
ROCK ON !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!! |
So, did you get it cranked yet?
|
Originally Posted by Wobble
(Post 2514419)
So, did you get it cranked yet?
From what i can see the bendix does not come out enough. |
Have you tried a different ignition switch yet? I went through the same problems last year. Changed batteries, wires, starters.......all to find out I had a dead spot in the ignition switch.
|
Originally Posted by BY U BOY
(Post 2511532)
My old one has the staggered bolts and the new one has the straight bolt pattern. I was told it will work and i feel some bolt holes on the block that match up,just didn't have time to screw with it lastnight.
There is your problem. Ya need the staggered one. Darrell. |
| All times are GMT -5. The time now is 03:22 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.