dept sender

Reply Subscribe

Thread Tools

04-20-2008, 07:56 PM

prostockcat

Registered

Thread Starter

iTrader: (1)

Join Date: Apr 2008

Location: sandown, nh

Posts: 561

Likes: 1

Received 4 Likes on 3 Posts

dept sender

I gor a 97 baja outlaw. the depth gauge works but shows no reading or 0 all the time. I cannot find where the sender is outside of the boat. any ideas thanks

04-20-2008, 08:05 PM

007joe

Registered

iTrader: (1)

Join Date: May 2007

Location: Staten Island, NY

Posts: 780

Likes: 9

Received 0 Likes on 0 Posts

May Have A "puck" Style, Thru Hull Sender In The Bottom Of The Hull Somewhere, Try Tracing The Wire From The Gauge....

04-20-2008, 08:36 PM

Smitty

VIP Member

iTrader: (1)

Join Date: Apr 2001

Location: Chicago il

Posts: 4,213

Likes: 3

Received 0 Likes on 0 Posts

Look for a small "puck" glued to the bottom of the bilge.

__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com

04-20-2008, 10:01 PM

DMOORE

Registered

Join Date: Jul 2007

Location: San Diego

Posts: 988

Likes: 0

Received 2 Likes on 1 Post

Most likeyl, the "puck" has popped loose. Mine seems to pop off about once a year. It gives the same 0 reading when it does.

Darrell.

04-21-2008, 07:08 PM

prostockcat

Registered

Thread Starter

iTrader: (1)

Join Date: Apr 2008

Location: sandown, nh

Posts: 561

Likes: 1

Received 4 Likes on 3 Posts

I think i found this puck style sender just in front of the motor. It seems like this is supposed to be a through hull style and the bottom of the boat is painted with bottom paint. Could this be why its not reading because it can't see the water?