Go Back  Offshoreonly.com > Technical > General Q & A
1999 Supercharged 454 problems >

1999 Supercharged 454 problems

Notices

1999 Supercharged 454 problems

Thread Tools
 
Old 04-29-2008 | 08:57 AM
  #31  
Thread Starter
Registered
 
Joined: Apr 2008
Posts: 22
Likes: 0
Default

Thanks kennyo! You are correct about me being in over my head. My problem is I'm in Nebraska and can not find a shop willing or able to workon my setup. They did find two fouled plugs and replace the impeller, but that was all the marine store could do for me.
I hear the general concensus and think taking it off is the way to go. Thanks for all of your help and wish me luck...giving it another month, then there may be one heck of a steal on a 99 Chappy on ebay for the right person.
Thanks all!
lilwigs is offline  
Reply
Old 04-29-2008 | 09:12 AM
  #32  
Big Cliff
Guest
 
Posts: n/a
Default

Originally Posted by lilwigs
Thanks kennyo! You are correct about me being in over my head. My problem is I'm in Nebraska and can not find a shop willing or able to workon my setup. They did find two fouled plugs and replace the impeller, but that was all the marine store could do for me.
I hear the general concensus and think taking it off is the way to go. Thanks for all of your help and wish me luck...giving it another month, then there may be one heck of a steal on a 99 Chappy on ebay for the right person.
Thanks all!

Don't give up, but DO NOT run the boat hard untill its figured out.

If the fuel pressure is jumping around that is a main problem. Make sure your fuel pressure regulator is good. Make sure your fuel pump is good. Make sure your filter is clean.

Are you running this boat on 93 pump gas? I'm sure it needs it.

Get in there and get your hands dirty.
 
Reply
Old 04-29-2008 | 09:28 AM
  #33  
Banned
 
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
Default

[QUOTE=lilwigs;2541741] My problem is I'm in Nebraska and can not find a shop willing or able to workon my setup. giving it another month, then there may be one heck of a steal on a 99 Chappy on ebay for the right person.

Wigs before you put it on ebay let us know if your gonna move on to another boat and we'll come get it good luck
RunninHotRacing163.1 is offline  
Reply
Old 04-29-2008 | 11:48 AM
  #34  
Registered
20 Year Member
 
Joined: Jun 2004
Posts: 1,949
Likes: 37
From: Omaha, Nebraska. Boat on the Mighty Mo! Longest river in the USA!
Default

[QUOTE=RunninHotRacing158;2541786]
Originally Posted by lilwigs
My problem is I'm in Nebraska and can not find a shop willing or able to workon my setup.
Where are you at in Nebraska?
1BIGJIM is offline  
Reply
Old 04-29-2008 | 02:35 PM
  #35  
Thread Starter
Registered
 
Joined: Apr 2008
Posts: 22
Likes: 0
Default

I'm running 91 octane pump fuel. I'm located in Lincoln, NE unfortunately. I pick it up from the shop today and afraid it'll be another few weeks till I can get this in someplace else but not sure where. I'm pretty mechanical, but never really had to troubleshoot this type of deal. When the fuel pressure guage jumps I'm not sure if it's the "cause" or effect of it missing at those rpms. I did find out the impeller did need replacing and they removed a piece of plastic that was blocking my upflow of water. It was still pumping though? I did have them replace the old fouled plugs with the NGK 5 or 6. Is advancing the timing something anyone has done with the computer. I was under the assumption the taking the tstat out was to trick the motor into dumping more gas and the charger wouldn't need any additional setting changed on the motor.
lilwigs is offline  
Reply
Old 04-30-2008 | 02:35 PM
  #36  
Thread Starter
Registered
 
Joined: Apr 2008
Posts: 22
Likes: 0
Default

For anyone not tired of my questions I think I have my problem narrowed down, but could use some final advise. With new plugs and impeller replaced it is running better. This was not my issue, but in running it for an hour last night I did notice my fuel pressure when I turned on the key was right at 40, then under normal running it would run 30-35. Under full boost at around 4000 rpm I can see the pressure fall to 20-25 and then it starts to cutout and surge as the pressure goes from 20 - 40. Just out of curiosity, I put a kink in the vaccum line to the regulator and to my surprise no performance difference. So that said I'm almost positive its in the fuel supply somewhere. Unfortunately I know nothing on this topic. I'm assuming the pump is fine since it hits 40 on turn key, but somewhere in the process I am unable to keep pressure. Looking at changing the seperator and fuel filter, but is my next step a new regulator? How can I test without just changing piece by piece? Thanks in advance to anyone who can help!!
lilwigs is offline  
Reply
Old 04-30-2008 | 03:21 PM
  #37  
Registered
 
Joined: Jul 2007
Posts: 988
Likes: 2
From: San Diego
Default

Originally Posted by lilwigs
For anyone not tired of my questions I think I have my problem narrowed down, but could use some final advise. With new plugs and impeller replaced it is running better. This was not my issue, but in running it for an hour last night I did notice my fuel pressure when I turned on the key was right at 40, then under normal running it would run 30-35. Under full boost at around 4000 rpm I can see the pressure fall to 20-25 and then it starts to cutout and surge as the pressure goes from 20 - 40. Just out of curiosity, I put a kink in the vaccum line to the regulator and to my surprise no performance difference. So that said I'm almost positive its in the fuel supply somewhere. Unfortunately I know nothing on this topic. I'm assuming the pump is fine since it hits 40 on turn key, but somewhere in the process I am unable to keep pressure. Looking at changing the seperator and fuel filter, but is my next step a new regulator? How can I test without just changing piece by piece? Thanks in advance to anyone who can help!!



Just a couple things. First NGK 5/6's are HOT plugs. Be sure this is what you should be running. Call procharger and ask. Second, the fuel pressure should not be falling off. I believe this is where your problem lies. I personally wouldn't run the boat with it doing that.
That is the PERFECT way to damage a piston. You are on the right track, change out all of the fuel filters, and water seperators. And, be sure there are no blockages in the lines. After this is done, then, start to look at the regulator and pump.


Darrell.
DMOORE is offline  
Reply
Old 04-30-2008 | 03:53 PM
  #38  
Fountain38SC's Avatar
Registered
 
Joined: Jan 2002
Posts: 1,145
Likes: 0
From: Cincinnati, Oh
Default

Just my. 02. You have a fuel problem no doubt about it. There is a difference between a fuel pump and/or system making pressure at idle and it not being able to keep up with demand at higher rpms. My guess is the entire fuel system is inadequate or improper and that the prior owner couldn't make it work.

I will second all of those that have said that you are going to hurt the motor running it that way. I learned the hard way years ago. I would never again guess at the problem. You really need to get someone who knows what they are doing or forget the procharger. I hope you don't learn an expensive lesson.
Fountain38SC is offline  
Reply
Old 04-30-2008 | 04:40 PM
  #39  
blue thunder's Avatar
Registered
20 Year Member
 
Joined: Nov 2001
Posts: 3,393
Likes: 6
From: IBX
Default

Make sure your fuel tank vent is not plugged of restricted. When you fill will fuel can you do it on full flow without the gas station pump nozzle clicking off?
blue thunder is offline  
Reply
Old 04-30-2008 | 05:45 PM
  #40  
Registered
20 Year Member
 
Joined: Nov 2003
Posts: 825
Likes: 30
From: Antioch, IL
Default

Originally Posted by DMOORE
Just a couple things. First NGK 5/6's are HOT plugs. Be sure this is what you should be running. Call procharger and ask. Second, the fuel pressure should not be falling off. I believe this is where your problem lies. I personally wouldn't run the boat with it doing that.
That is the PERFECT way to damage a piston. You are on the right track, change out all of the fuel filters, and water seperators. And, be sure there are no blockages in the lines. After this is done, then, start to look at the regulator and pump.


Darrell.
I agree with the fuel regulator on an aeromotive fuel system. The vacuum regulated fuel regulator is to increase pressure with boost. I think you have a bad diaghram in the regulator. It is kind of common.
Bob
RBeyer is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.