Mystery part
05-21-2008, 04:15 PM
#1
Charter Member#157
Charter MemberThread Starter
Join Date: Oct 2000
Location: Minneapolis, Mn, Usa
Posts: 1,859
Likes: 0
Received 3 Likes
on
3 Posts
Mystery part
Can I get some ideas here on this?
Not the best pictures but hopefully someone knows what this is
Found it on the bottom of the drive behind the thrust washer
Some sort of bushing? or rubber spacer?
Not the best pictures but hopefully someone knows what this is
Found it on the bottom of the drive behind the thrust washer
Some sort of bushing? or rubber spacer?
__________________
This Cat is trying to keep up with the Big Dogs
This Cat is trying to keep up with the Big Dogs
VIP Member
05-21-2008, 05:11 PM
#3
Charter Member#157
Charter MemberThread Starter
Join Date: Oct 2000
Location: Minneapolis, Mn, Usa
Posts: 1,859
Likes: 0
Received 3 Likes
on
3 Posts
Guess its safe to assume I could do away with it?
Going to look up on the microfilm to see if I can find it
thanks
__________________
This Cat is trying to keep up with the Big Dogs
This Cat is trying to keep up with the Big Dogs
05-21-2008, 09:04 PM
#4
Charter Member#157
Charter MemberThread Starter
Join Date: Oct 2000
Location: Minneapolis, Mn, Usa
Posts: 1,859
Likes: 0
Received 3 Likes
on
3 Posts
anyone have an online drawing or scan of the Y-pipe assembly?
Cannot find it on Bam's site
Cannot find it on Bam's site
__________________
This Cat is trying to keep up with the Big Dogs
This Cat is trying to keep up with the Big Dogs
05-21-2008, 09:15 PM
#5
Gotta know where to look.
Problem is, the pic is of the old style, which is no longer availible. I'm sure the part number is superceded to the new all 1 peice design. The square bushing is for the newer y-pipe that are slotted vs have a hole for the bushing.
http://www.mercruiserparts.com/Show_...haust+Pipe+Kit
Problem is, the pic is of the old style, which is no longer availible. I'm sure the part number is superceded to the new all 1 peice design. The square bushing is for the newer y-pipe that are slotted vs have a hole for the bushing.
http://www.mercruiserparts.com/Show_...haust+Pipe+Kit
Gold Member
05-21-2008, 09:24 PM
#7
Offshoreonly Advertiser
Offshoreonly Advertiser
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
05-22-2008, 05:19 AM
#9
Charter Member#157
Charter MemberThread Starter
Join Date: Oct 2000
Location: Minneapolis, Mn, Usa
Posts: 1,859
Likes: 0
Received 3 Likes
on
3 Posts
thanks guys!
Bam, guess I need to learn your site better
Now that I see this I Think I need to tear into it to get the remainder of the flapper assembly out of there?
This is not my primary exhaust route so i know its not a complete blockage.
But at times I do close the tips and use this route with more pressure
At least I am thankfull that it is not a DRIVE peice
Bam, guess I need to learn your site better
Now that I see this I Think I need to tear into it to get the remainder of the flapper assembly out of there?
This is not my primary exhaust route so i know its not a complete blockage.
But at times I do close the tips and use this route with more pressure
At least I am thankfull that it is not a DRIVE peice
__________________
This Cat is trying to keep up with the Big Dogs
This Cat is trying to keep up with the Big Dogs
Thread
Thread Starter
Forum
Replies
Last Post
TEAMBAJA
General Boating Discussion
10
10-08-2003 07:27 AM
