Rubber boot for ignition key.
#1
Registered
Thread Starter
Join Date: Jun 2007
Location: Tustin, CA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Rubber boot for ignition key.
Having a hard time finding a part. Hoping someone here can steer me in the right direction.
I have a 2007 Warlock. Ignition key has a rubber boot on it with a slit the key slides through into the ignition. The rubber boot has ripped and I'm having the damndest time finding a replacement.
Warlock used Eddie and Dana marine accessories when building the boat, checked with both of them with no luck.
Thanks!
Mike
I have a 2007 Warlock. Ignition key has a rubber boot on it with a slit the key slides through into the ignition. The rubber boot has ripped and I'm having the damndest time finding a replacement.
Warlock used Eddie and Dana marine accessories when building the boat, checked with both of them with no luck.
Thanks!
Mike
#2
It's made by Cole Hersee. We carry the complete switch assembly with the rubber boot nut, part # ISW-M712-09, the cost is $28.00. The nut only is part number 83288. We don't carry the nut only. We have to buy pack quantities when purchased, so we can't just order one.
#4
I just off the phone with Cole Hersee and they're out of stock. I was going to buy the case because it seems that there may be enough call to stock them. Cole Hersee won't have them available for 3-4 weeks.
I had the salesperson run a recent sales history on the rubber nut only, part # 83288. She came up with one company that you may have luck with, Kellogg Marine. Phone # 860-434-6002.
I had the salesperson run a recent sales history on the rubber nut only, part # 83288. She came up with one company that you may have luck with, Kellogg Marine. Phone # 860-434-6002.