|
Originally Posted by Tidal Sails
(Post 2650807)
Hi Steve, could my problem with uneven idle be do to to cold operating range 140F on my 350 mag mpi? Cannot find out what is wrong.. Are
|
I dont think 170 is a problem.What temp does water boil at?212
|
Originally Posted by JJONES
(Post 2650837)
I dont think 170 is a problem.What temp does water boil at?212
Not a huge problem, but its definately an indicator of something. It is running 25-30* higher than the tstat. After re-rereading, I see that the idle temp is high also. If thats the case, disregard plugging the top holes on the drive. They would be completely submerged and throws the sucking air theory out the window. There is a water flow issue or an obstruction somewhere. |
Originally Posted by Griff
(Post 2651130)
Not a huge problem, but its definately an indicator of something. It is running 25-30* higher than the tstat.
After re-rereading, I see that the idle temp is high also. If thats the case, disregard plugging the top holes on the drive. They would be completely submerged and throws the sucking air theory out the window. There is a water flow issue or an obstruction somewhere. |
Good to hear. Probably the easiest thing to change that has been causing you grief. Glad you figured it out.
|
| All times are GMT -5. The time now is 08:08 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.