Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Synthetic Motor Oil or NOT ??? (https://www.offshoreonly.com/forums/general-q/190869-synthetic-motor-oil-not.html)

Hydrocruiser 07-21-2008 12:02 PM


Originally Posted by minxguy (Post 2629596)
If Mobil V-Twin is 22 cST it is not a 50. The max spec for a 50 is 21.89 cST.
They would never overbuild on the viscosity.

Ken

H Ken..you are right on the new Mobil-1 site the cst @100*C is 17.7. M-1 15W-50 is 18.

I think some reformultaing has been done. Too bad.

That's why bike racers are moving on to Motul 15W-50 as they say M-1 V-Twin is shearing in endurance racing.

Some are also going to Amsoil 20W-50 V-Twin which has a cst of 20 @100*C.

Redline 20W-50 or 15W-50 is a great choice too.

Noting stays the same forever I guess...

Big Time 07-23-2008 10:34 AM

I've been using synthetic in my 525 but it seems to be burning through a lot of oil...any idea what would be causing that?

I run it hard in spurts, but I'm not sitting on it at WOT all the time.

07DominatorSS 07-23-2008 09:56 PM


Originally Posted by Big Time (Post 2632370)
I've been using synthetic in my 525 but it seems to be burning through a lot of oil...any idea what would be causing that?

I run it hard in spurts, but I'm not sitting on it at WOT all the time.

First things first, what are you using? How much are you burning, how often?

Big Time 07-24-2008 07:32 AM


Originally Posted by 07DominatorSS (Post 2633217)
First things first, what are you using? How much are you burning, how often?

Using Mobil 1 Synthetic 15W 50. I went through 2+ qrts in about 20 hrs

Hydrocruiser 07-24-2008 12:30 PM


Originally Posted by Big Time (Post 2633425)
Using Mobil 1 Synthetic 15W 50. I went through 2+ qrts in about 20 hrs

Try Amsoil V-Twin 20W-50 I think your consumption will go down. It has a tendency to seal around pistons very well.

http://www.amsoil.com/storefront/mcv.aspx

StrikinLightnin 07-24-2008 12:51 PM


Originally Posted by Hydrocruiser (Post 2633809)
Try Amsoil V-Twin 20W-50 I think your consumption will go down. It has a tendency to seal around pistons very well.

http://www.amsoil.com/storefront/mcv.aspx

I went that route myself on my other boat.
It will help somewhat with consumption.
My big blocks have always had this thing where you check oil level even after blasting and things are OK.
Then a fews days later it will have taken a drink.
Nature of the beast.......:cool-smiley-011:
d

Donman 07-24-2008 01:08 PM

1 Attachment(s)

Originally Posted by Hydrocruiser (Post 2621189)
I heard Teague uses Amsoil.



Yea, I think Bob likes Amsoil. :D

07DominatorSS 07-24-2008 01:19 PM


Originally Posted by Donman (Post 2633849)
Yea, I think Bob likes Amsoil. :D

He uses the new 15w-50 Dominator Racing Oil and the SVT 75w-110 Gear Lube

StrikinLightnin 07-24-2008 01:24 PM

:D

Originally Posted by Donman (Post 2633849)
Yea, I think Bob likes Amsoil. :D


He does now........:drink:
Damn I could use a free T-shirt

Hydrocruiser 07-24-2008 07:16 PM

Amsoil is making it's way to the very top of synthetics..they are taking things very seriously.

They have an outstanding line. I would use any of their products with confidence.


All times are GMT -5. The time now is 10:53 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.