Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Need help... someone with a bad Bravo 1? (https://www.offshoreonly.com/forums/general-q/191348-need-help-someone-bad-bravo-1-a.html)

Brandon 07-18-2008 09:07 AM

Need help... someone with a bad Bravo 1?
 
Click on the link below and I need part # 10 on the diagram. Just the fork that changes the gears. Been searching and went to shops but Merc. does not sell any of these parts separate and they want me to buy the whole kit for $1500! Uh... I just need a $20 piece. So if any of you have an old drive thats junk or extra parts please let me know. Thanks!!!
Brandon

http://www.mercruiserparts.com/Show_...TER+COMPONENTS

Brandon 07-18-2008 09:36 PM

ttt. Anyone?

Smitty 07-18-2008 09:44 PM

I'll check my buddies shop tomorrow and get back to you.

Brandon 07-18-2008 10:09 PM

COOL THANK YOU!!!:ernaehrung004:

Brandon 07-19-2008 09:42 AM

ttt

johnny g 07-19-2008 10:32 AM

Try Jim Templet 225-698-6648 or David Wade 225-752-3789 tell them Johnny Gascon sent ya!

Smitty 07-19-2008 12:41 PM

Brandon

He has the piece you need but will only sell it as part of a used upper gear set. He needs 450.00 plus shipping costs. Sounds like a great deal to me since the new part is 1500.00

If you want it give him a call. His name is George and his number is 1-630-240-5401.

Tell him Dave Smith referred you.

Good luck

Payton 07-19-2008 02:10 PM

I believe I have one. Let me look in my box-o-stuff.
I had a drive with a major truama last summer. Twisted every shaft in the drive. The grears all look good, but I don't think I would trust them. So the shifting fork is availible. I'll check and make sure it's in the box. $20+ whatever it cost toget it to you.

Payton 07-19-2008 02:39 PM

It's there and looks usable. It still has the upper and lower cams attached. I'll leave it that way. PM me your info and I'll get them on UPS Monday if you want them.



Mark Kingma

Brandon 07-19-2008 04:26 PM


Originally Posted by Payton (Post 2628742)
It's there and looks usable. It still has the upper and lower cams attached. I'll leave it that way. PM me your info and I'll get them on UPS Monday if you want them.

I see you are a regestered user. You maynot be able to PM me. My cell # is 219 746 4118

Mark Kingma

Been away from the house for awhile and leaving again now, my email is [email protected]. Shoot me an email and I'll send my address in the AM. Let me know your address also and what it cost to ship and I'll get the money sent to you. THANK YOU VERY MUCH!!!!
Brandon


All times are GMT -5. The time now is 01:22 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.