Offshoreonly.com - Precision Marine, Kenner La.

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Precision Marine, Kenner La. (https://www.offshoreonly.com/forums/general-q/191803-precision-marine-kenner-la.html)

[QUOTE=Young Performance;2636005]

Quote:

Originally Posted by pbam22 (Post 2635874)

You talking about your DADDY!!!!:evilb:

ya think so:readinghelp::stupid:

Quote:

Originally Posted by Bryan Rose (Post 2635833)

Well I was thinking and re reading this post and forgot to post the best speed of the day that muggy hot morning last Tuesday.

5400 RPMs spinning a box stock Bravo I yielded a best of 89.4 GPS with the boat solidly planted and glued to the water with the tabs....once I can loosen the boat up with the trim and less tab input by going to 380 plates I have no doubt the boat will run over 90 GPS with no problem...I have a strange hull that is a twin step boat with full length lifting strakes (4), 2 on each side) to the transom, so some prop testing is in order as well.

Thanks again Mark !

Bryan

let that thing buz on up:drink:

yep Mark is a rare one in the biz,honest, I would use him again and recommend him to anybody.He is also good with non blower stuff making some good power.Also Dustin's 500efi 3.3 kit is very easy to put on and complete kit, makes very stout TQ.I'm running on the 4th season with no problems at 8pds.

Thanks you Mark for all your help when we started my engine build up
Rob:ernaehrung004:

Quote:

Originally Posted by Strip Poker 388 (Post 2639074)

yep Mark is a rare one in the biz,honest, I would use him again and recommend him to anybody.:

100% Agree

If anyone needs some Precision Marine motors that are built and ready to run NOW let me know. I need to find a home for mine as our plans have changed.

Look at the link in my signature.

$72K invested, asking $60K - Make me an offer!

No expense spared these are NICE! Need more HP then as Rob said "TURN UP THE BOOST"!

Quote:

Originally Posted by Dock Holiday (Post 2639302)

That would be a hell of a deal for somebody, you have a shet load of hardware in the motors,Mark what power you trying to come up with now?

Rob:ernaehrung004:

Quote:

Originally Posted by Strip Poker 388 (Post 2639311)

,Mark what power you trying to come up with now?

Rob:ernaehrung004:

Putting the 500EFI's back in the boat.