#6 drive service in Illinois ????
08-12-2008 | 08:31 AM
#11
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
08-12-2008 | 09:35 AM
#12
VIP Member
Joined: Dec 2001
Posts: 10,397
Likes: 402
From: Cape Coral, Florida
Craig went through both of my #6's last fall and I couldn't be happier with his work.
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.
08-12-2008 | 11:25 AM
#14
Registered
Joined: Dec 2002
Posts: 3,363
Likes: 165
From: Providence,RI
08-12-2008 | 01:21 PM
#16
Platinum Member
Joined: Aug 2004
Posts: 396
Likes: 1
From: PA/ MD
At least you cant say I was kidding a bought drive busting. We need to get that rig down here to the Chesapeake Bay and really ring her out for 100s of miles on 1 to 2 foot chop as a change of pace from that wild big ass water you guys run on.
Good luck with your rig Bill Craig is the best!
Glen AKA Wildwarrior
Quote from March 08
We ran up to 16lbs on 93 pump gas safely engine wise before we settled on 13lbs + we could go higher however our test rig and drives don't do well with that much power it's a hand full to drive and we destroyed several gear sets in our #6s. The injection really allows us to make hp on pump gas.!
http://www.youtube.com/v/_JrlY46kRjs
Good luck with your rig Bill Craig is the best!
Glen AKA Wildwarrior
Quote from March 08
We ran up to 16lbs on 93 pump gas safely engine wise before we settled on 13lbs + we could go higher however our test rig and drives don't do well with that much power it's a hand full to drive and we destroyed several gear sets in our #6s. The injection really allows us to make hp on pump gas.!
http://www.youtube.com/v/_JrlY46kRjs
08-12-2008 | 03:28 PM
#17
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
At least you cant say I was kidding a bought drive busting. We need to get that rig down here to the Chesapeake Bay and really ring her out for 100s of miles on 1 to 2 foot chop as a change of pace from that wild big ass water you guys run on.
Good luck with your rig Bill Craig is the best!
Glen AKA Wildwarrior
Quote from March 08
We ran up to 16lbs on 93 pump gas safely engine wise before we settled on 13lbs + we could go higher however our test rig and drives don't do well with that much power it's a hand full to drive and we destroyed several gear sets in our #6s. The injection really allows us to make hp on pump gas.!
http://www.youtube.com/v/_JrlY46kRjs
Good luck with your rig Bill Craig is the best!
Glen AKA Wildwarrior
Quote from March 08
We ran up to 16lbs on 93 pump gas safely engine wise before we settled on 13lbs + we could go higher however our test rig and drives don't do well with that much power it's a hand full to drive and we destroyed several gear sets in our #6s. The injection really allows us to make hp on pump gas.!
http://www.youtube.com/v/_JrlY46kRjs
we'll get her wound up ... egts & O2s are L@@kin great a few more pulley changes and another set of props and she'll be good, hopefully i dont have to have a spare set of drives on the shelf too
Thread
Thread Starter
Forum
Replies
Last Post
IceAngel
General Boating Discussion
32
05-13-2004 07:28 PM
