motor parts quote needed.
#1
Registered
Thread Starter
Join Date: Aug 2005
Location: sint maarten
Posts: 1,491
Likes: 0
Received 0 Likes
on
0 Posts
motor parts quote needed.
ok... before i buy this stuff from somebody else, i am happy to give the advertisers here a shot at quoting this stuff. please send me the quote direct to my e mail address:
1 set stainless intake valves . 2.19 , 3.71, 5.220, 21-4N stainless or better.
1 set stainless exhaust valves. 1.88, .371, 5.355 , 21-4n stainless or better
1 set push rods for 502 mag mpi , 3/8 , 7.640 intake , 8.600 ex
2 felpro FPP-17207 head sets ( as in for 2 motors)
please quote only if parts are available for immediate shipment.
thanks.
1 set stainless intake valves . 2.19 , 3.71, 5.220, 21-4N stainless or better.
1 set stainless exhaust valves. 1.88, .371, 5.355 , 21-4n stainless or better
1 set push rods for 502 mag mpi , 3/8 , 7.640 intake , 8.600 ex
2 felpro FPP-17207 head sets ( as in for 2 motors)
please quote only if parts are available for immediate shipment.
thanks.
Last edited by stevesxm; 12-31-2008 at 11:09 AM.
#6
Registered
Thread Starter
Join Date: Aug 2005
Location: sint maarten
Posts: 1,491
Likes: 0
Received 0 Likes
on
0 Posts
they have the rest but when i spoke to them they said they coulkdn't commit to the 18th either ... might be longer. i am trying to get everything, one time here, so i can get on with this.
#10
Registered
Steve,
$750 plus shipping. I can ship everything within a day. Make certain that those are the correct pushrod lengths, I think they are a little longer than stock. If you have any questions my email is [email protected]
Bill Koustenis
Advanced Automotive Machine
Waldorf Md
$750 plus shipping. I can ship everything within a day. Make certain that those are the correct pushrod lengths, I think they are a little longer than stock. If you have any questions my email is [email protected]
Bill Koustenis
Advanced Automotive Machine
Waldorf Md