first time addjustment
When installing a new set off hydraulile roller lifter,pushrods, and roller rockers (they have not been pump up) For the first time do you turn down onr turn or 1/4 turn 1999 BBC.
|
once you've got all the slop out of the pushrods, I will go 3/4 to 1 turn, did they give you any instructions for the lifters.
|
|
lifters
Originally Posted by hoozeyurdaddy
(Post 2801186)
once you've got all the slop out of the pushrods, I will go 3/4 to 1 turn, did they give you any instructions for the lifters.
|
Morel??????
|
Originally Posted by Ken N
(Post 2801148)
When installing a new set off hydraulile roller lifter,pushrods, and roller rockers (they have not been pump up) For the first time do you turn down onr turn or 1/4 turn 1999 BBC.
Take a squirt oil can and fill them thru the small hole in the side of the lifter before you put them in. Install them and set 3/4 turn preload. We put a little extreme pressure lube on the pushrod tips. I also spray the valve springs and rockers with the Comp Cam assembly spray. |
lifters
Originally Posted by TylerCrockett
(Post 2803590)
Take a squirt oil can and fill them thru the small hole in the side of the lifter before you put them in. Install them and set 3/4 turn preload. We put a little extreme pressure lube on the pushrod tips. I also spray the valve springs and rockers with the Comp Cam assembly spray.
Would priming the engine through the distribor hole with a electric drill do the same thing. The engine has been sitting all winter anyways? Ken N. |
All times are GMT -5. The time now is 01:14 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.