Question about replacing exhaust manifolds...
 

There are two ads on OSO for Gil Manifolds and tails. One add is for 2 sets off hp500's. The other sets are off of 500 Bulldogs. Will these work on a boat with trs dimensions ? I was thinking the bravos exit lower than the trs. Trying to get away from reversion problems. Any other options or advice?
Thanks:ernaehrung004:

The Bravo tail pipes exit at a 14 degree down slope and are much shorter than the TRS tail pipes. Usually they are pointing in a far lower exit location than a standard TRS used. If your TRS pipes had quite a bit of downslope they may work. If your existing hoses are very flat you more than likely will have problems.