shift cable adjustment
#2
Banned
Joined: Oct 2006
Posts: 5,844
Likes: 0
From: Bradenton Florida

NOOOOOO,,just kidding ,,its a fine line between the 2 ,,,i always go ahead and set in neutral at the helm ,,then take the lower cable and pull,or push it in neutral aswell,,,,the hook it in by adjusting the upper cable that comes from the helm.
Sometimes it has to be adjusted on both ,,but it helps u get very close !!
#3
Registered
Joined: Jan 2004
Posts: 4,480
Likes: 43
From: Tennessee
Sounds like you need more throw. The cable from the helm can be adjusted as far as the amount of throw it has. There is a slot in the arm that it mounts to. If you move it farther away from the pivot point, you will increase it throw. Hope this helps, Eddie.



dang got one still trying the other motor

