Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Best exhaust for the money (https://www.offshoreonly.com/forums/general-q/208565-best-exhaust-money.html)

rssteiny 05-10-2009 05:44 PM

Best exhaust for the money
 
What would be the most cost effective exhaust for my 500hps that would be better than the stock gill, i have my long risers yet but sold the manifolds, now i need something without reversion problems using a bigger cam. would love to find 2 sets used but have had no luck to this point.

Thanks

niceguy 05-10-2009 07:49 PM

What about some dry lightnings?

rssteiny 05-11-2009 07:28 AM

Cant go dry my exhaust on mt 32 active thunder is up above swim platforf with the heat of dry i see bad things happening with burns.

niceguy 05-11-2009 08:35 AM

Have you looked at the Hardin Marine Typhoons(I think)... I was unable to dig up any actual people who owned any, but maybe call them or CP and ask about them?

Griff 05-11-2009 10:41 AM

CMI Unitops.

Wobble 05-11-2009 12:06 PM

Best for the money would be Revolution Marine, better than stock and very reasonably priced

DareDevil 05-11-2009 12:11 PM


Originally Posted by rssteiny (Post 2863386)
Cant go dry my exhaust on mt 32 active thunder is up above swim platforf with the heat of dry i see bad things happening with burns.

A dry exhaust is not hoter then a wet ,,,the pipe is still water jacked !!!!:party-smiley-004:

Wobble 05-11-2009 12:48 PM

Revolutions website is down, but their number is (651) 777-4747

I have installed a few sets about four or five years ago, still looking good

97 FOUNTAIN 05-11-2009 12:53 PM

thought you where going to keep the gil you cound not afford to buy new thanks for selling them to some one else after we had a deal

CPPerformance 05-11-2009 02:00 PM


Originally Posted by rssteiny (Post 2863027)
What would be the most cost effective exhaust for my 500hps that would be better than the stock gill, i have my long risers yet but sold the manifolds, now i need something without reversion problems using a bigger cam. would love to find 2 sets used but have had no luck to this point.

Thanks

So are you trying to use the original risers? and just find a replacement manifold? What size is the camshaft?


All times are GMT -5. The time now is 08:29 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.