![]() |
MSD BOX GM-2L getting no spark
Ignition Box is getiing no spark.. went through a few different ways to test but still no spark..
what can i do to trouble shoot this.. thanks |
If you try the test below and there is no spark ....replace the box ......
http://msdignition.com/page.aspx?id=3206 |
Yeah tried that , it's a brand new box, is their any other way..
thanks offthe front |
Sorry the box is the
6M-2L marine box.. |
WAIT !!!! are you SURE ???? by god i have NEVER heard of an MSD box going bad...
this is shocking news. alert the media. msd ought to sell those things in pairs. one to get you halfway there and the second one to get you back home... |
Originally Posted by qaberdeen
(Post 2872394)
Sorry the box is the
6M-2L marine box.. need more info ..... what motor ...Distributor .....coil ... you say the box is new? It never worked ? Or stopped? ...details .....m |
3 Attachment(s)
hers some pics of the motor
|
what Distributor part #? and coil? good news is that box if brand new should be under warranty ...bad news is those boxes cannot be repaired ....
|
It's entirely possible that the new box is JUNK as hard as that may seem to believe. A few years ago my msd 6 box got dropped from about 5 feet onto concrete,it was 6 or 7 years old and still worked flawlessly up until this happened. I decided to upgrade to the marine box,the same one you have. The first one I ordered would only rev so hi even though the chip was much higher (it also did it with chip removed),would occasionally quit t of the blue. I sent it back andgot another,it was WORSE,had weird intermittent problems. I called Msd countless times,they kept blaming MY install. I rewired it and it made ZERO diffference. I then ordered a 3rd box AND a msd tester. Guess what,I immediately took the 3rd box out of it's packaging and hooked the tester to it,it was JUNK right out of the box (it would spark a few times if you had tester on it and wiggled the input wires alot!!! Disgusted,I sent everthing back and installed a crane hi box,it has been trouble free so far,Smitty
|
Originally Posted by articfriends
(Post 2872915)
It's entirely possible that the new box is JUNK as hard as that may seem to believe. A few years ago my msd 6 box got dropped from about 5 feet onto concrete,it was 6 or 7 years old and still worked flawlessly up until this happened. I decided to upgrade to the marine box,the same one you have. The first one I ordered would only rev so hi even though the chip was much higher (it also did it with chip removed),would occasionally quit t of the blue. I sent it back andgot another,it was WORSE,had weird intermittent problems. I called Msd countless times,they kept blaming MY install. I rewired it and it made ZERO diffference. I then ordered a 3rd box AND a msd tester. Guess what,I immediately took the 3rd box out of it's packaging and hooked the tester to it,it was JUNK right out of the box (it would spark a few times if you had tester on it and wiggled the input wires alot!!! Disgusted,I sent everthing back and installed a crane hi box,it has been trouble free so far,Smitty
Darrell. |
| All times are GMT -5. The time now is 06:18 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.