![]() |
Operation "facelift"
Motor/drive pulled, int out, ventury off(for good), bow rail gone (relocate) antenas gone, holes filled (west sys) deck resurfaced,
repair areas first prime, Interior sides repainted (two tone). Total time 30 hrs. I might be ahead of schedual. still alot ahead of me. Block, prime, sand, color coat, sand, grafics and clear, sand and clear. And buff of coarse. No pics yet, I'll have to figure out how in my spare time. Geo |
Step two complete
First prime today. Fill minor defects and sand tomarrow. Tinted filler primer will be applied on Mon.
|
TOO OLD, I'm only doing the top side this year, below the rail next year. Also I have done this sort of thing for 28yrs. Mostly cars, a few boats and 1 airplane and that was the worst. The last boat I did only got wet 5 times. Came apart on shut down @220mph. (More Grounds For Divorce) was the name T/A hydro.
Good luck on yours and keep me posted. Geo |
GEO, glad to see that your underway. Soundsl like you've gotten quite a ways, hopefully with no encountered problems. Do you think that those seats will work for you, or are you going to use them in the other boat? I've got to finish my interior, but the person doing it wont have time until around May sometime. Oh Well, it's not going anywhere anytime soon. Oh yeah did you see the post from NW Jim about the get together in Bremerton?
Les |
TOO OLD, Use 80grit for straitness, or if you have a large area of repair and it had alot of fill, I used a 8" mud hog to take it down enough to finish by hand. That also is a air tool. 150-180 to smooth out prior to priming. I use a longboard or hard block for straitness, by hand, softblock with 150 to smooth area prior to priming. To sand any major area I have with a DA air sander. I used 150 on all jellcoat prior to priming. I have a 26' took about 2 hrs to sand entire boat. I was glad I wasn't doing below the rail though. One thing I could recommend though is using GOOD sandpaper, it's not cheep but remember (time is money and good men don't sweat.:D Happy Easter Too Old. PS my wife asked how old is he and my reply was maybe about my age.:D Geo
|
TINTED FILLER PRIMER TODAY
OK< I may make another post on how to post pics. I can get them into the comp, but then I am lost. But applied tinted primer today, (brite red), same as main color. I'll block sand tomarrow finish sand thurs. Can't wait till sat to paimt main color. GEO
|
Wear ear plugs when using a DA. If your ears ring after noise exposure, you are damaging the inner ear- my right ear rings all the time from working in a body shop to fund my coolige edumacation.
Or could it have been the L-88 427 with headers in my Sleekcraft jetboat? Bulldog |
WHAT DID YOU SAY BULLDOG!!!
|
FIRST COLOR SPRAYED
Painted deck and dash rise white pearl for grafics base color.
Still have a long way to go though. Headway is headway though. :D GEO |
Cmon Geo, get them photos up :D
Les |
| All times are GMT -5. The time now is 02:29 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.