Offshoreonly.com - Starboard motor mount lags pulled out of stringer

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Starboard motor mount lags pulled out of stringer (https://www.offshoreonly.com/forums/general-q/211237-starboard-motor-mount-lags-pulled-out-stringer.html)

Dave M

06-19-2009 12:41 PM

1 Attachment(s)

Here's a pic of my mounts, through bolted to the stringers. Simple and functional.

DareDevil

06-19-2009 02:29 PM

Quote:

Originally Posted by Dave M (Post 2892360)

Here's a pic of my mounts, through bolted to the stringers. Simple and functional.

All i see on that picture ,,,,is u need longer indicator cables on the tabs. LOL:eek:

Ghostrider

06-19-2009 04:02 PM

1 Attachment(s)

Here's my mounts with the 'U-Shaped' Clamps that then get bolted through the stringers over where the old mounts used to go. ( epoxy and doweled the old holes first)

I then welded the box section replacement mount bases to these plates:

All times are GMT -5. The time now is 07:20 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page