Offshoreonly.com - bumping up rev limiter on 500hp

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - bumping up rev limiter on 500hp (https://www.offshoreonly.com/forums/general-q/211441-bumping-up-rev-limiter-500hp.html)

Has anyone on here done this before ?

Quote:

Originally Posted by rssteiny (Post 2895196)

My msd wires are red and white going back to a purple and gray wire ,, there is also a capped off purple w/ white stripe.

my dist wires are white w/ red stripe and white /w green stripe.

coil wires are orange and black.

if this helps at all that is what i got.

The wire colors would be the same. It has to be one of the ignition systems that I posted.

Does your ignition module look like whats in the first link (part #36)or the one in the second link(part #38)????

Probably the easiest and simplest way is to just get rid of your distributors and ignitions all together and get some MSD distributors. Then add a soft touch rev limiter.

Quote:

Originally Posted by Griff (Post 2896442)

THATS WHAT I WAS THINKING.

THANKS