GoFastSonic

Installing new Water PSI gauges in the race boat. Where is the best place to get a good reading on the Motors ? Im thinking up on the T housing ?

Rookie

iTrader: (4)

Intake manifold. Some plumb into the bottom of the block but have problems with sediment clogging over time.

If you do plumb the T-stat housing it has to below the T-stat of course.

GoFastSonic

Thanks
Thats what i was thinking. We dont have and stats in so thats an easy one.

Lofty

Yep, allways on the manifold or t stat. it's the press you want to know anyway and down low on the block and they're prone to clog... even with strainers....