496 w/intermittent alarm but no fault codes
07-29-2009, 08:44 PM
#1
Registered
Thread Starter
Join Date: Jul 2009
Location: Chaptico, MD
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
496 w/intermittent alarm but no fault codes
I have a 2003 496 HO which is sounding 2 beeps every 60 seconds only when engine running - not when key/ignition is just in "on" position. Gear Lube bottle full, oil and water temps and pressure fine, and No Fault Codes appearing in fault history on scan tool. Appreciate any ideas on cause/next steps i can take before taking to service center.
