Trim Indicator Fitting... Where to Order???
#1
Registered
Thread Starter
Trim Indicator Fitting... Where to Order???
Hey guys... looking for the compression fitting that threads into the trim tab and holds the indicator cable/prevents leaking. Can ANYONE tell me where to buy these?
#2
Registered
I always get my stuff from BAM. Great service.
http://www.mercruiserparts.com/selec...doc_nbr=891720
http://www.mercruiserparts.com/selec...doc_nbr=891720
#3
Registered
Do you need just the compression fitting or the entire indicator kit (pin, comp. fitting, etc)?
If you just need the fitting, I can get the number for it. The plastic one is just an electrical fitting that can be bought from any supply house (McMaster Carr, Grainger, etc) You can only get the kit from Merc., not individual pieces. The plastic one is over $100 and the stainless one is just over $200.
If you just need the fitting let me know and I will get the number for you.
Eddie
If you just need the fitting, I can get the number for it. The plastic one is just an electrical fitting that can be bought from any supply house (McMaster Carr, Grainger, etc) You can only get the kit from Merc., not individual pieces. The plastic one is over $100 and the stainless one is just over $200.
If you just need the fitting let me know and I will get the number for you.
Eddie
#5
Registered
It is made by Hubbell
The part # is SHC2022CR. It has 1/2 npt straight male thread and fits diameters of .25-.38".
You should be able to Google it and find it at a supply house.
Hope this helps.
Eddie
The part # is SHC2022CR. It has 1/2 npt straight male thread and fits diameters of .25-.38".
You should be able to Google it and find it at a supply house.
Hope this helps.
Eddie