blower/ pro charger
#1
Thread Starter
Registered
Joined: Jul 2002
Posts: 2,233
Likes: 1
From: pa
who makes a small blower/ procharger with 3-5 lbs boost max want to stay turn key on my 500hps with minamal boost. have very little height clearance. whats better blower or pro charger/ whipple.
#3
Thread Starter
Registered
Joined: Jul 2002
Posts: 2,233
Likes: 1
From: pa
#5
Registered
Joined: Jan 2004
Posts: 4,480
Likes: 43
From: Tennessee
Yes, I think you would be better off building a larger NA engine if you only want 650 hp. Take your current setup to 540, 547, or 555 cu in and you will easily make 650+ hp. It will be a much simplier set-up over the sc. Now I think superchargers are great, but not in your situation. You could probably do the larger NA engine cheaper than a good sc set-up. It is definitely the way to go if you were planning on doing the bottom end anyway. Give me a shout if I can help.
Eddie
Eddie
#6
Thread Starter
Registered
Joined: Jul 2002
Posts: 2,233
Likes: 1
From: pa
Yes, I think you would be better off building a larger NA engine if you only want 650 hp. Take your current setup to 540, 547, or 555 cu in and you will easily make 650+ hp. It will be a much simplier set-up over the sc. Now I think superchargers are great, but not in your situation. You could probably do the larger NA engine cheaper than a good sc set-up. It is definitely the way to go if you were planning on doing the bottom end anyway. Give me a shout if I can help.
Eddie
Eddie




