What brand oil pans do you guys like to use?

I'm looking for recommendation for marine application, 540 CI with Dart block.

Thank you

I assume you have 1 piece RR. main seal.

Here is what I used on my 540's

http://www.cantonracingproducts.com/...ion&key=18-362

I also installed these so no more dry starts:

http://www.cantonracingproducts.com/...ion&key=24-016

Smitty

I have a few of the Keith Eickert cast aluminum pans.
New they were over a grand each. think you can get them around $700 each now.

If you like I will let two of them go for $400 each.
They are either 12 or 14 quart,.......can't remember off hand.


Jon

Smitty,

Dart uses the 2pc rear main seal.

Thanks
Mark

Mark

Canton also makes pans for the 2 piece rr main seal. They have all kinds of pans.

Are you looking for steel or aluminum. I went with steel to save $$$$$.

Dave

I use the Canton 18-364 - BBC REAR SUMP MARINE POWER PAN (18-364)
A little more money but it a nice pan.

Kris Vogt

Jon,

I am interested in those. Do you have any pictures or other information on them?

Thanks
Mark

***

Mark

Make sure you will have enough clearance under those KE pans. The stringers in our boats are close to the bottom of the motors.

Smitty

Canton here