TRS Merc II Tranny Weight?????
12-18-2009, 05:57 PM
#1
Registered
Thread Starter
Join Date: Jul 2002
Location: Orange County CA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
TRS Merc II Tranny Weight?????
Anyone know the weight of the Merc II transmission?
I have the short version not the borg warner long one.
Im guessing around 150-200 pounds. But an exact weight would help for the shipping costs.
Thanks SHU
I have the short version not the borg warner long one.
Im guessing around 150-200 pounds. But an exact weight would help for the shipping costs.
Thanks SHU
12-18-2009, 09:03 PM
#5
Registered
Don't the B-W's have a steel case? Merc Trans are aluminum and only have half the internals. I'll be at my shop tomorrow and will weigh one and post this time tomorrow.
12-19-2009, 12:46 AM
#8
Registered
Thread Starter
Join Date: Jul 2002
Location: Orange County CA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Thanks that helps.
Its just a awkward lift. Thought for sure it would be over a 100.
Well at least the shipping is going to be cheaper. LOL
Thanks.
SHU
Its just a awkward lift. Thought for sure it would be over a 100.
Well at least the shipping is going to be cheaper. LOL
Thanks.
SHU
12-19-2009, 09:48 PM
#10
Registered
Thread Starter
Join Date: Jul 2002
Location: Orange County CA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Much appreciated.
I plugged in 150 for the shipping so i will have to recalculate that.
Gunnah be cheaper for sure.
Thanks a bunch.
You in need of a complete TRS package w 2 RH drives? 1 off running boat the other a full rebuild w all new gears, nose cone?
Thanks Kevin
I plugged in 150 for the shipping so i will have to recalculate that.
Gunnah be cheaper for sure.
Thanks a bunch.
You in need of a complete TRS package w 2 RH drives? 1 off running boat the other a full rebuild w all new gears, nose cone?
Thanks Kevin
