Offshoreonly.com - newbie w/ 575sci ?

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - newbie w/ 575sci ? (https://www.offshoreonly.com/forums/general-q/224108-newbie-w-575sci.html)

getrdunn

02-17-2010 09:09 PM

(269) 428-5070.

Advantage 575

02-17-2010 09:15 PM

Quote:

Originally Posted by HOTRODREDNECK (Post 3049055)

do you have a contact # for him?

661-299-5483. Just replaced a blower on a 2003 575 with 60 Hrs. Intercooler will help if blower fails. Chances are the blower has smaller pulley which will drastically reduce the life of the bearings because of the increased RPM. Motor has flat tappet cam which isn't the greatest in a boat.
But motor has awesome potential. And if you have a superchiller IC, future rebuild with Whipple IC and 871 is a dame height as the 573 w/IC.

boatfreak

02-17-2010 09:34 PM

Is this boat in Indy or a suburb? I live just South of Indy.

Quinlan

02-18-2010 07:41 AM

Brad Smith in Joplin punched out my 575s to right at 650 hp last summer. VERY happy

HOTRODREDNECK

02-18-2010 07:47 AM

Quote:

Originally Posted by boatfreak (Post 3049096)

Is this boat in Indy or a suburb? I live just South of Indy.

i have an address. you think you might be able to look at it for me?

teamsynergy

02-18-2010 12:59 PM

DMPE is what I recommend... he just did one of mine.. (the other one was done last year by blower shop). Total bill was 480 and some change... very satisfied...

On a side note... no need to crack the hatch... I have these...
http://img51.imageshack.us/img51/214/dsc02480l.th.jpg

And of course the money shot...

http://img161.imageshack.us/img161/3866/dscf0319.th.jpg

ciaoderhead

02-18-2010 01:19 PM

Quote:

Originally Posted by Young Performance (Post 3049009)

I would not go to TBS to get them rebuilt. I, along with many others on here, use Darrin Meyers in MI. They run around 500-600 for a complete rebuild.
Eddie

+1 on DMPE. They did several of mine and added teflon wipers. Great job and turn around.

Have a fresh one sitting on the shelf if anyone is interested. Was a spare but sold that boat.

boatfreak

02-18-2010 03:29 PM

Quote:

Originally Posted by HOTRODREDNECK (Post 3049235)

i have an address. you think you might be able to look at it for me?

I should be able to. I am leaving Monday for a week but if you can get me an address I'll try to get there before I go.

HOTRODREDNECK

02-18-2010 06:21 PM

Quote:

Originally Posted by boatfreak (Post 3049663)

I should be able to. I am leaving Monday for a week but if you can get me an address I'll try to get there before I go.

thx i sent you a pm

All times are GMT -5. The time now is 06:28 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page