reverse rotation engine
#1
Registered
Thread Starter
Join Date: Dec 2007
Location: toms river nj
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
reverse rotation engine
i have a 502 that the customer says it is a reverse rotation. was wondering if all you have to do is change the cam and the starter also the distributor gear to turn it back to standard rotation. will be pulling off timing cover today to verify.
Last edited by 88scarab; 02-20-2010 at 06:09 AM.
#4
Registered
and the timing chain cover seal.
I wouldn't think the gear on the dist would have to be changed. In most RR motors the cam still spins the right way it's just the crank that spin "backward"
Also if the motor has been run you may have to have the crank resurfaced due to the scales on the metal would be going the wrong way.
I wouldn't think the gear on the dist would have to be changed. In most RR motors the cam still spins the right way it's just the crank that spin "backward"
Also if the motor has been run you may have to have the crank resurfaced due to the scales on the metal would be going the wrong way.
Last edited by f_inscreenname; 02-20-2010 at 08:51 AM.
#6
Registered
Thread Starter
Join Date: Dec 2007
Location: toms river nj
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
ok i was just hoping to swap a few things and then ready to go so i mite as well rebuild this thing and i thought 502s never came reverse rotation and i believe its a gen5