Offshoreonly.com - Whipple MOAC IC plumbing

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Whipple MOAC IC plumbing (https://www.offshoreonly.com/forums/general-q/226291-whipple-moac-ic-plumbing.html)

Advantage 575

03-13-2010 07:37 PM

Whipple MOAC IC plumbing

Has anybody plumbed a whipple MOAC IC from a two stage pump. Whipple recommends -16 from pump to sand stainer then (2) -12 from the strainer to the IC. I don't want to starve the engine with water. Two stage pump has 1 1/4 hose from out drive through strainer the to main inlet of pump.

PAST DUE

03-13-2010 10:13 PM

i dont think you will be able to get enough water through your outdrive to supply the engine and the intercooler i think its best to force feed the intercooler from its own water supply like separate pickups

CB-BLR

03-13-2010 11:40 PM

Quote:

Originally Posted by PAST DUE (Post 3066901)

x2

Chris

I DIG IT !!

03-14-2010 01:47 PM

Quote:

Originally Posted by CB-BLR (Post 3066921)

x2

Chris

X3 just get a pick up on the back of the boat for the IC all by itself. This is really the best setup

Advantage 575

03-14-2010 06:06 PM

MOAC IC Plumbing

Quote:

Originally Posted by I DIG IT !! (Post 3067132)

X3 just get a pick up on the back of the boat for the IC all by itself. This is really the best setup

alright, a pickup for the IC. Then what is the best method for two stages from the pump? I have a 575 SCI plumbing system but the motor is a 540 CI with 871. I want to keep my thermostat and c-pump

All times are GMT -5. The time now is 02:09 AM.