Whipple MOAC IC plumbing
03-13-2010 | 07:37 PM
#1
Thread Starter
Registered
Joined: Jan 2010
Posts: 297
Likes: 0
From: North Bend Ohio
Whipple MOAC IC plumbing
Has anybody plumbed a whipple MOAC IC from a two stage pump. Whipple recommends -16 from pump to sand stainer then (2) -12 from the strainer to the IC. I don't want to starve the engine with water. Two stage pump has 1 1/4 hose from out drive through strainer the to main inlet of pump.
03-13-2010 | 10:13 PM
#2
Registered
Joined: Jul 2009
Posts: 173
Likes: 0
From: GILBERT, S.C.
i dont think you will be able to get enough water through your outdrive to supply the engine and the intercooler i think its best to force feed the intercooler from its own water supply like separate pickups
03-13-2010 | 11:40 PM
#3
Chris
Joined: Sep 2005
Posts: 1,426
Likes: 1
From: Snohomish, WA
03-14-2010 | 06:06 PM
#5
Thread Starter
Registered
Joined: Jan 2010
Posts: 297
Likes: 0
From: North Bend Ohio
MOAC IC Plumbing
alright, a pickup for the IC. Then what is the best method for two stages from the pump? I have a 575 SCI plumbing system but the motor is a 540 CI with 871. I want to keep my thermostat and c-pump
