Offshoreonly.com - Will these risers work with a bravo

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Will these risers work with a bravo (https://www.offshoreonly.com/forums/general-q/228093-will-these-risers-work-bravo.html)

endeavour32

04-10-2010 02:20 PM

Will these risers work with a bravo

1 Attachment(s)

Can anyone tell me if these risers will work on a bravo set up. Actually I'm going from a 454 alpha to a bravo drive but i think the transom cut outs are in the same location.

Rockfish71

04-10-2010 02:37 PM

You will be fine as long as you are running the same engine

endeavour32

04-10-2010 02:39 PM

These are supposed to be for a transmission set up. So you think these will work with a bravo?

Rockfish71

04-10-2010 02:41 PM

I thought you where running before the swap it's going to be a coin toss they can be reworked to fit right.

endeavour32

04-10-2010 02:42 PM

I really don't know. I would think they can be tweaked but I want to make sure before I buy them.

Boat Tech

04-10-2010 05:53 PM

Quote:

Originally Posted by endeavour32 (Post 3084675)

Actually I'm going from a 454 alpha to a bravo drive.

I'm not sure about the risers, But just be aware that you will need a new bravo style Thermostat housing or your engine will over heat at idle, If you do not change it out from the alpha thermostat housing.

Smitty

04-11-2010 09:59 AM

They look a little long for a non-transmission equipped boat.

All times are GMT -5. The time now is 12:14 PM.