how much do i machine?
05-21-2002 | 03:06 PM
#21
Registered
Joined: Oct 2000
Posts: 4,541
Likes: 107
From: Western Michigan
I was just going to say that if any of you needed a set of Ross 4.50" (turns a 502" into a 509" engine) forged 8.5 cr flat top pistons (8.5 cr based on a 121cc chamber) I have 2 sets that have low hours (without pins) for $150 per set or $250 for both sets. Mark 616-291-7932
