EMI exhaust and cam duration...
#1
Registered
Thread Starter
Join Date: Oct 2000
Location: On the river
Posts: 3,372
Likes: 0
Received 0 Likes
on
0 Posts
EMI exhaust and cam duration...
I am about to purchase a set of small block chevy EMI manifolds with the aluminum risers. The guy at Eddie marine today said the max cam duration for the aluminum riser's is 230*. If any bigger then that reversion might happen..
So who on the board is running a cam bigger then 230* duration with the EMI aluminum riser's. If its on the ragged edge I can weld extensions on to reduce the chance for reversion. Their is just no room in the budget for the stainless tube riser's.
Thanks guys
Travis
So who on the board is running a cam bigger then 230* duration with the EMI aluminum riser's. If its on the ragged edge I can weld extensions on to reduce the chance for reversion. Their is just no room in the budget for the stainless tube riser's.
Thanks guys
Travis
Thread
Thread Starter
Forum
Replies
Last Post
Rockfish71
General Q & A
6
07-17-2008 07:52 AM